Table of Contents
Advertisement
Information
Troubleshooting
Connection
Symptom
The PC cannot detect the
Digital Audio Player.
Transfer/Deletion
Symptom
Some transferred files are
missing.
The PC cannot detect this
Digital Audio Player.
Deletion of the files on the
Digital Audio Player is not
possible.
Playback
Symptom
A WMA file is not played
back.
LED lamp does not turn
on.
Guide voice cannot be
heard during playback
operation.
The music files in the
playlist cannot be played
back.
Downloaded from:
https://www.usersmanualguide.com/
Cause
Your PC may work incorrectly.
For Windows 98SE users: The USB
driver is not installed.
A USB hub or a USB extension cable
is used.
The device name of the unit is set to
other than "JVC_XA_A".
Cause
The transfer error occurs.
The built-in memory may be full.
The device name of the unit is set
to other than "JVC_XA_A".
Some utility/music software on
your PC may keep from deleting.
Cause
WMA-DRM files are transferred by
dragging and dropping.
The LED setting may be set to "LED
off".
The battery is low.
The Voice guide setting may be set
to "Off".
The guide voice files are missing.
The target music files do not exist on
the built-in memory of the Digital
Audio Player.
Playlist is not saved in unicode
Action
Restart your PC, then connect the
Digital Audio Player again.
Install the USB driver.
Connect directly using the supplied
USB cable.
Rename the device name of the unit as
"JVC_XA_A" manually.
Action
Check the connection.
Check the remaining memory size, and
delete the unwanted files if necessary.
Rename the device name of the unit as
"JVC_XA_A" manually.
Pause or quit the utility/music software.
Action
Transfer WMA-DRM files using Windows
Media Player.
Change the LED setting.
Change the battery.
Change the Voice guide setting.
Import the Guide voice files from the
supplied CD-ROM into the "voice" folder on
the Digital Audio Player.
Change the playlist or import the music
files.
Advertisement
Table of Contents
