Setup; Installing The Handle - Toro Recycler 21321 Operator's Manual

Setup

Important:
Remove and discard the protective plastic sheet that covers the engine and any other
plastic or wrapping on the machine.
1

Installing the Handle

No Parts Required
Procedure
WARNING
Folding or unfolding the handle improperly can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or unfolding the handle.
• If a cable is damaged, contact an Authorized Service Dealer.
Important:
Hold the handle while engaging the handle knobs to avoid pinching your hands.
1. Remove the handle knobs and carriage bolts from the handle brackets (A of
Figure 3
5
Figure 3).
g410958