Lenovo Thinkpad S2 2nd Gen Hardware Maintenance Manual page 67

2. Loosen the screws that secure the base cover assembly.
3. Pry up the latches in ascending alphabetical order (a to f) as illustrated, and then remove the base
cover assembly.
Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds. Apply those labels when
you replace the base cover. For the labels that are not shipped with the new base cover, peel them off from
the old base cover, and adhere them to the new one.
The following illustration shows the location of each label for Windows 7 and Windows 10 based computer
models.
.
Chapter 9 Removing or replacing a FRU
61