Table of Contents
Advertisement
Names and Functions
of Parts
2-1 Front Panel
a
(power) indicator
Lights green when the 1 (power)
button is on.
b 1 (power) button
Switches the power on and off.
Notes
• Make sure you eject the cartridge
from this unit before turning the
power off. Be sure to eject the
cartridge especially before moving
this unit.
• If you turn the power off with the
cartridge injected, the cartridge is
ejected automatically. The
(power) indicator and
CARTRIDGE IN indicator on the rear
panel maintain lit. The CARTRIDGE
Chapter
IN indicator on the front panel flashes
four times a second. (ODS-D280U)
c ACCESS indicator
Flashes blue when the media is being
accessed from the computer.
However, this indicator flashes once a
second while writing the media
management data to the media is
being held after the media access is
finished.
During this data write hold time, you
can still perform the operations
including ejection of the cartridge and
an operation from the computer.
The operation is actually processed
after the media management data
writing is completed.
The media management data writing is
held for about 5 seconds.
Upon expiration of the data write hold
time shown above, the media
management data writing begins even
if you do not eject the cartridge or
perform any operation from the
computer.
Note
Do not press the 1 (power) button to
turn off, or do not disconnect either the
power cord or USB cable while the
ACCESS indicator is lighting or
flashing. Doing so may lead to loss of
data on the media.
2
2-1 Front Panel
11
Advertisement
Table of Contents
