Advertisement
AD-7740H
Part Names and Functions
1. Front Panel
This panel prevents dust from entering the Optiarc Writer and
opens automatically when the Load/Eject button is pushed.
2. Busy Indicator
This indicator lights during data read and write operation.
3. Load/Eject Button
This button is pressed to eject or retract the disc tray when the
power is on.
4. Emergency Eject Hole
Use to remove the disc from the DVD Writer if the electrical eject
is disabled by software or if power failure occurs.
(see „Emergency Eject" for details)
Sony Optiarc Europe
User's guide
3
AD-7740H
Installation & Configuration
The drive configures itself independently through the connector.
Note: Not all computer hardware supports the intended automatic configuration. If
the device is not supported the computer may not boot up normally. In such case
the drive's firmware must by changed by qualified personnel. Or you may have to
update your chipset drivers/firmware.
Installing in a host computer
Please note that this drive is designed for usage in portable
computer. Thus it has standardized dimensions and connector. If
the slimline drive is not targeted for a standard S-ATA slimline
system, additional adapters must be procured from an appropriate
expert trader.
1. Turn off the computer, other peripherals and unplug all the
cords and cables. Then remove the computer cover, face plate,
mounting clips, and keeper bracket. Refer to the operation guide
that came with your computer for help with this step.
2. Slide the slimline drive into the computer in such a way that you
are able to connect the intended plug.
3. Connect the intended plug with the socket on the back of the
slimline drive.
4. Slide the drive into the computer and fix it in the computer
cabinet with appropriate screws. To avoid damage to the drive
make sure screws do not go beyond 1.5 mm into the Optiarc
Writer's cabinet.
5. Reassemble the computer and close the housing cover. Refer
to the operation guide that came with the computer for help with
this step.
Sony Optiarc Europe
User's guide
4
Advertisement
