Table of Contents
Advertisement
Chapter 1
Introduction
Optional Equipment
Unpacking
VXI-SC-1102 User Manual
National Instruments offers a variety of products to use with your
VXI-SC-1102 module, as follows:
•
Terminal blocks and 96-pin cables that allow you to attach input
signals to your submodule
•
SCXI Process Current Resistor Kit
For more specific information about these products, refer to your
National Instruments catalogue or call the office nearest you.
Your VXI-SC-1102 submodule is shipped in an antistatic package to
prevent electrostatic damage to the submodule. Electrostatic discharge
can damage several components on the submodule. To avoid such
damage in handling the submodule, take the following precautions.
•
Ground yourself via a grounding strap or by holding a grounded
object.
•
Touch the antistatic package to a metal part of your VXIbus chassis
before removing the submodule from the package.
•
Remove the submodule from the package and inspect the
submodule for loose components or any other sign of damage.
Notify National Instruments if the module appears damaged in any
way. Do not install a damaged submodule into your VXIbus
chassis.
•
Never touch the exposed pins of connectors.
1-18
© National Instruments Corporation
Advertisement
Table of Contents
