Table of Contents
Advertisement
www.reelschematic.com
www.reelschematic.com
Scale
The depth 'Scale' is displayed vertically along the right side of the
chart. The depth 'Scale' can be configured to display four different ways:
as an 'Overlay', in the 'Corners', with 'Basic' or 'No Scale'.
To Change the Scale Setting:
1. Highlight the 'Chart' tab on the Setup Menu.
2. Highlight the 'Scale' selection fi eld and press ENTER.
3. Choose 'Overlay', 'Corners', 'Basic' or 'No Scale', press ENTER to
accept the selection.
Scale — Overlay
Scale — Corners
Unit Operation
Setup Menu/Chart
Scale — Basic
Scale — No Scale
17
Advertisement
Table of Contents
