Advertisement
1
Upon opening, first determine that there was no damage occurred during transport
and that the light fixture is complete. Otherwise, please contact your seller
immediately, as later claims may not be considered.
Assemble the lighting fixture according to the manual, recognizing that its
installation wiring may only be carried out by a qualified electrician following general
legal regulations.
Place the glass part with the metal ring
on the mounting
. The pins on the
1
2
underside of the glass shall fit into the holes in the groove of the base. Turn the glass
to close the bayonet joint.
Congratulations! You may now reconnect the power and turn the light on.
When dismantling, first turn off the light and disconnect from the power supply.
Then follow the above steps in reverse order. Use the original or similar packaging for
possible later transport of the light fixture to prevent damage.
1
2
Advertisement
