Frigidaire Gallery GCFI306CBF Use & Care Manual page 64

64
BEFORE YOU CALL
Other Problems
Problem
Appliance is not level.
Cannot move appliance
easily. Appliance must be
accessible for service.
Oven light does not work.
Cause / Solution
Be sure the fl oor is level, strong, and stable enough to adequately support
the range.
If the fl oor is sagging or sloping, contact a carpenter to correct the situa-
tion.
Poor installation. Place the oven rack in the center of the oven. Place a level
on the oven rack. Adjust the leveling legs at the base of the appliance until
the rack is level.
Kitchen cabinet alignment may make range appear not level. Be sure cabi-
nets are square and have suffi cient room for appliance clearance.
Cabinets not square or are built in too tightly. Contact the builder or install-
er to make the appliance accessible.
Carpet interferes with appliance. Provide suffi cient space so the appliance
can be lifted over carpet. Installation over carpet is not advised. See the
installation instructions for guidelines specifi c to your appliance.
Be sure the oven light is secure in the socket. See "Replacing the Oven
Light" on page 26.