Table of Contents
Advertisement
Removing and replacing a FRU
1100 Palm rest or Palm rest with
fingerprint reader (14.1-in. LCD models)
For access, remove these FRUs in order:
v "1010 Battery pack (14.1-in. LCD models)" on page 72
v "1040 Hard disk drive" on page 76
v "1060 Keyboard" on page 80
Notes
v In models with the fingerprint reader, the sensor
has been attached to the palm rest FRU as the
child part. In case of the fingerprint reader has
any defects and needs to be replaced, you need
to replace the palm rest by following the
procedures in this section. The procedures are
same both for the palm rest without the fingerprint
reader and for the palm rest with the fingerprint
reader.
v For some models, this FRU is secured by using a
tamper resistant torx head screw (TR7).
(continued)
90
MT 1871/1872/1875/1876
Advertisement
Table of Contents
