Table of Contents
Advertisement
DTM-3237B – DVB-S2X Receiver with DVB-ASI Output
User Manual
4.5.8 DiSEqC Send and Receive Options
The manageable items in category 0x93 can be used to send and receive DiSEqC message to/from
LNB's, switches or motors. DiSEqC messages can contain as much data as required.
Manageable Items – Category 0x93 – DiSEqC send and receive commands
Nr
Variable
0x01
Burst
0x02
Send DiSEqC
message
0x03
Send DiSEqC
message and
receive response
0x04
DiSEqC response
message length
0x05
DiSEqC response
message
4.5.9 Satellite Information
The read-only items in category 0x94 contains the Transport-Stream ID, Network ID and all fields
from the Satellite Delivery System Descriptor if available in the Transport-Stream.
Manageable Items – Category 0x94 – Satellite Information
Nr
Variable
0x00
All
0x01
State
0x02
Transport-Stream
ID
0x03
Network ID
Description
Send DiSEqC Burst A/B
0 = Burst type A
1 = Burst type B
Send DiSEqC message
Send DiSEqC message and receive
response, which enables the DiSEqC
receiver during transmission. The
received response can be retrieved
through items in this category.
DiSEqC response message size in bytes
DiSEqC response message data
Description
All settings in this category
State of the information-extraction
engine
0 = No TS-packet lock
1 = TS-packet lock
2 = Transport-Stream-ID field is valid
3 = Network-ID field is valid
4 = Transport-Stream-ID and Network-
ID fields are valid
5 = All fields are valid
Identification of this Transport-Stream
Identification of this delivery system
28
Access
Type
DE-WO
uint8
DE-WO
1...100
bytes
DE-WO
1...100
bytes
RO
uint8
RO
1...100
bytes
Access
Type
RO
27 bytes
RO
uint8
RO
uint32
RO
uint32
Advertisement
Table of Contents
