DTM-3237B – DVB-S2X Receiver with DVB-ASI Output
User Manual
3.4.6 Stream Status LED
The status LED indicates the status of the DVB-S2X receiver and the ASI output stream. The following
colors are used for status indication:
Continuous green
Short green flashes
Short red/green flashes
Red flashes
Valid DVB-S2X signal detected and
generating signal on DVB-ASI output
No DVB-S2X signal detected and no output
generated on DVB-ASI output
The DTM-3237B is in firmware upgrade
mode. This modes allows:
1) Upgrading the firmware and go back to
normal operation afterwards
2) Go to normal operation (in case valid
firmware is present)
Internal device error.
If resetting the device does not help,
contact DekTec support.
14