How To Use - Xiaomi Mi Smart Standing Fan 1X User Manual

Installation Instructions
Step 2: Open the fan assembly
Take fan assembly apart, then turn the front grille counterclock-
２
wise until it separates from the rear grille, as shown in Figure
Remove the fan blade assembly as indicated by Figure
２
Fan Assembly
11 12
front grille
fan blade assembly
Installation Instructions
Step 5: Install the front grille
1. Align Front Grille Alignment Mark with
11
Le Alignment Mark, and make sure the front grille is properly
embedded into the rear grille.
2. Turn the front grille clockwise until the Front Grille Alignment
Mark aligns the Rear Grille Right Alignment Mark. Make sure the
grilles are securely fastened.
Rear Grille Le
Alignment Mark
Front Grille
Alignment Mark
Top View before
Fastening the Front
& Rear Grille
11 13
Step 6: Fasten the front grille
Insert fan grille screw into the hole
８
at the bo om of the fan grille. Turn the
screw clockwise by using the
key to tighten it.
②
.
Figure
①
Figure ②
13
rear grille
Rear Grille
13
Rear Grille Right
Alignment Mark
Front Grille
Alignment Mark
Top View a er Fastening
the Front & Rear Grille
８
AAllen
６
６
Step 3: Install the rear grille
Firstly, install the rear grille to the motor's sha with "
upwards, and then install
① .
the knob clockwise to firmly fix the rear grille to the motor's
sha .
Step 4: Install the fan blade assembly
Align the center hole of the fan blade assembly with the motor's
sha and install it onto the sha , then install
assembly knob onto the motor's sha . Turn the knob counter-
clockwise in order to fix the fan blade assembly to the motor's
sha .
14

How to Use

Connect to a power outlet
Connect the power cable to the power port on the base and then
plug it into a power outlet. When you hear a beep, the fan is
successfully connected to the power supply.
Turn on/off
Turn on
Press the bu on
time, the default speed is slow (1). A er turning off the fan and
turning it back on again, the speed will be the last used one.
Turn off
When the fan is working, press and hold the bu on
Adjust speed & switch mode
Adjust speed
Press the bu on
speed will go up one level and the corresponding status indicator(s)
will be on (see the table below). A er turbo (4), the speed will return
to slow (1).
Fan Speed
Indicator
Status
Note： means the indicator is on; means the indicator is off.
15
fan grille knob onto the sha . Turn
５
５
４
to start the fan. When turned on for the first
to adjust the speed. With each press, the
Slow (1) Medium (2) Fast (3)
" facing
fan blade
４
to stop it.
Turbo (4)