Toyostove Laser 73AT Assembly, Installation And Operation Instructions page 13

Laser clean heating system / vented heater
Table of Contents

Advertisement

1.
Clean Louvers (ONCE A WEEK)
Dust and stains should be wiped off louvers with a damp cloth.
2.
Clean Circulation Fan Cover (ONCE A WEEK)
Remove only dust or pet hair from the cover on the back of the heater.
3.
Check for Fuel Leaks (REGULARLY)
Make it a habit to check for any sign of fuel leakage along the fuel line and at
all joints. Fuel leaks may lead to risk of fire.
4.
Check Flue Pipe Area (ONCE A WEEK)
Check the flue pipe joint to make sure connection is firm. Use a vacuum
cleaner to remove any dust or pet hair.
5.
Clean Fuel Strainer (ONCE A MONTH)
The strainer of the fuel sump should be cleaned once a month and before
storing heater at the end of each season.
(a) Close the valve(s) of the separate fuel tank.
(b) To catch the fuel which will drain out, set the oil catch below the strainer
cover, with a small container under it.
(c)
Loosen the two screws from the strainer cover and remove.
(d) Remove the strainer and wash with kerosene.
(e) Return the strainer to its original position. Replace strainer cover and
screw to secure.
(f)
Wipe away any spilled fuel.
(g) Open the valve(s) of separate fuel tank. Check for fuel leakage.
Note:
At the end of each season unscrew the drain screw to remove all the remaining fuel from the
fuel sump. Be sure to follow the A and B procedure listed above.
6.
Recommended Periodic Maintenance
As a state-of-the-art furnace, your heater requires periodic inspection and service by an authorized
technician to insure optimum, trouble free performance. This inspection should include: a combustion
check; flue pipe check; burner assembly check; cleaning all necessary parts and replacing gaskets as
needed. Please ask your authorized Toyostove dealer for details and scheduling. When using Ultra Low
Sulfur Diesel (ULSD) the heater should be serviced at least every two years because the distillation of
ULSD is heavier than 1-K Kerosene and No. 1 Fuel Oil. When using 1-K Kerosene or Low Sulfur No. 1
Fuel Oil your heater can be serviced less frequently.
Check
Oil catch
Fuel
Strainer
Drain
Screw
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Laser 73L-73L-73at

Table of Contents