Section A; Specifications - Toyostove Laser 73AT Assembly, Installation And Operation Instructions

Laser clean heating system / vented heater
Table of Contents

Advertisement

SECTION A:

SPECIFICATIONS

Model:
Heater Efficiency:
Heat Rating:
Fuel Consumption:
Fuel System:
Fuel Type:
Dimensions (W
(Includes drip tray)
Weight:
Vent Pipe Hole:
Maximum Length of Vent Pipe System:
Electrical Rating:
Typical Room Size (3):
(1)
Heat and vaporized water are produced by the combustion process of this heater. This rating does not
take into account heat loss due to condensation of water vapor.
(2)
External tank to be purchased from local suppliers.
(3)
0˚ F Heat Load
20˚ F Heat Load = 20 BTU/ft
Room size for which this heater is suitable will vary depending on outside temperature, house
insulation, window size, and other factors.
2
H
D):
= 24 BTU/ft
/hr
2
2
/hr
Laser 73 / Laser 73AT
92% (1)
High - 40,000 BTU/h (11,733 Watts)
Med - 27,000 BTU/h (7,920 Watts)
Low - 15,000 BTU/h (4,400 Watts)
High - 0.301 gal/h (1.139 L/h)
Med - 0.203 gal/h (0.768 L/h)
Low - 0.113 gal/h (0.428 L/h)
External tank (2)
ASTM D3699 1-K Kerosene, ASTM D396 Low Sulfur No.1
Fuel Oil, or ASTM D975 Ultra Low Sulfur Diesel (ULSD)
30"
27-1/2"
16-3/4"
(76.2
68.8
42.5 cm)
88 lbs. (40 kg) Empty
2-3/4" ~ 3" diameter
(7.0 - 7.5 cm)
10 ft. (3 m), 3 bends or less
120 Volts AC, 60 Hz
Preheat - 260W
Burning - 60W
1670 square feet (0˚F)
2000 square feet (20˚F)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Laser 73L-73L-73at

Table of Contents