1
3
G01031
1
Figure 66
2. Remove the hardware from the front deck hangers
on both sides of the deck (Figure 67).
3. Carefully lift the deck off the rear hanger bolts and
lower the front of the mower deck to the ground
(Figure 67).
1
2
4
Figure 67
1. Deck hanger
2. Hairpin cotter
3. Washer
4. Welded post on deck
4. Raise the height-of-cut to the transport position
5. Slide the mower out from underneath the machine.
Note: Retain all parts for future installation.
2
5
6
7
3
G010304
5. Rear hanger bolts
6. J-hook
7. Rear deck hanger bracket
60 inch Mower Decks
1. Remove the hair pin cotter and washer securing the
long, link bar to the frame and deck; remove the link
bar (Figure 68).
1
1. Hair pin cotter
2. Washer
2. Remove the hardware from the front and rear deck
hangers on both sides of the deck (Figure 67).
1
4
1. Deck hanger
2. Hairpin cotter
3. Raise the height-of-cut to the transport position
4. Slide the mower out from underneath the machine.
Note: Retain all parts for future installation.
46
2
3
G010309
Figure 68
3. Link bar
1
2
4
3
G010305
Figure 69
3. Washer
4. Welded post on deck
2
3