Table of Contents
Advertisement
MAINTENANCE
3.Maintenance of spark plug
In order to ensure the engine normal running, gap of the spark plug must
be correct and no deposit around the spark plug.
or just stopping a moment.
1) Remove the spark plug cap.
2) Clear away dirt around the spark plug base.
3) Dismantle the spark plug with a spark plug wrench.
4) Visually check the spark plug. Clean with a steel brush. If the insulator
is damaged, replace the spark plug instead.
5) Measure the spark plug clearance with a feeler. The clearance should
be 0.7~0.8mm. If adjustment is necessary, bend the side electrode
carefully.
6) To avoid cross-threading, first, screw in spark plug by hand, then
tighten with a spark plug wrench to compress the gasket.
7) If a new spark plug is used, more twist 1/2 turns after compressing the
gasket.
· 20 ·
0.7-0.8mm
SPARK PLUG MODEL
TORCH: F6TC/F6RTC/F5RTC
Advertisement
Table of Contents
