Table of Contents
Advertisement
3. BATTERY CONNECTION
BATTERY
CONNECT TO
TERMINAL PRODUCT
Use 12V and more than 18A.H battery, connect its positive lead to start
relay terminal while connect its negative lead to engine mounting screw,
base screw or other grounding point with the engine.(See Fig. 2)
Check the battery's connecting point; make sure that it is tight and not
rusted. If rusted, clean and connect. Apply the grease on the end and
connector lug.
1. The battery may give off explosive gas, keep sparks, flames and
cigarettes away. Charge or use it indoors with good ventilation.
2. The battery contains sulphuric acid (electrolyte). Contact with skin
or eyes may cause severe burns. If electrolyte gets in your skin,
15 minutes and call a physician at once.
3. Electrolyte is poisonous. If swallowed, drink large quantities of
RECTIFIER
PRE-OPERATE INSPECTION
· 11 ·
Advertisement
Table of Contents
