Setting The Input Capacity - T+A E 1000 Series User Manual

Setting the input
capacitance
(Impedance)
Miniature switches „2" are used to set the desired input capacitance for
the left (2L) and right (2R) channels. The information you need for this
will be included in the manufacturer's specification for the pick-up system
you intend to use. Select the value which is closest to the manufacturer's
stated figure. Note that the phono connecting lead also represents a
capacitance in the range 50 to 200 pF, depending on the manufacturer. It
is essential to set the same value for both channels. If you do not have
access to the manufacturer's specification, a good starting point for input
capacitance is 120 pF. This is the factory default setting.
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF ON
ON
OFF OFF
ON
OFF OFF
ON ON
OFF
OFF ON ON
ON OFF OFF
ON OFF OFF
ON OFF ON
ON ON
OFF
ON ON
OFF
ON ON OFF
ON ON ON
ON ON ON
19
OFF
ON 121 pF
OFF 141 pF
ON 161 pF
191 pF
OFF
ON 221 pF
241 pF
OFF
ON 261 pF
OFF 291 pF
ON 341 pF
OFF 361 pF
ON 381 pF
401 pF
OFF
ON 441 pF
OFF 461 pF
ON 481 pF
120 pF
<
... 140 pF
... 160 pF
... 190 pF
220 pF
...
240 pF
...
260 pF
...
... 290 pF
... 340 pF
... 360 pF
... 380 pF
400 pF
...
440 pF
...
... 460 pF
... 480 pF
... 500 pF
Table 2