Sylvania SP650 - Water Bottle Speaker Manual

Notes

• Please read this manual carefully before use.
• Avoid the use of this speaker in the high-temperature and high humidity environment.
• Do not throw to avoid falling damage of the speaker.
• Avoid self disassemble of speaker, or it will result in the failure of warranty.
• Please charge speaker with power adaptor output rated voltage 5V.
• Long time high volume playing is likely to cause hearing damage

Product Standard Accessories

Technical Data

Button Functions

Volume Up / Next Song
Press quickly for next song, press and hold to increase volume.
Power on / Off
Press and hold for 3-5 second to boot speaker, press and hold for 3-5 second again to switch off speaker.
Press quickly for mode switch
Volume Down / Last Song
Press quickly for last song, press and hold to decrease volume.
Play/Panse
When music playing, press the button to pause and play.

Insert SD Card
Speaker can play the music in SD card.
Working LED indicators:
Power on: blue LED light flashes quickly;
Bluetooth Paired: blue LED light flashes slowly;
Charge Status: green LED lights on;
RESET Function
Press " RESET" to restart the speaker
USB Charge Socket
Use a computer USB port / power adapter to recharge speaker

Bluetooth Connection

Press power on/off button and hold for 3-5 second, then prompt voice for Bluetooth connection, blue light flashing, Bluetooth is ready for connection.

Click the settings in Bluetooth devices, then search for device list and find "SP650", then click for connection. Blue lights on and speaker will beep, Bluetooth is connected successful.

Notes:

1. SP650 Bluetooth Speaker can be connected to mobile phone or tablets with a Bluetooth chip inside, and can be paired with notebook, compatible with iOS, Android and other mainstream operating system.
2. After first successful connection, restart the speaker, Bluetooth will be automatically connected back again.

SD card music playing mode

Enter SD Card Music Playing Mode
Insert SD card with music files into the SD slot, press and hold the"Power"button to turn on speaker, when speaker voices out reminder"SD Card Mode", speaker will enter directly into the" SD card music playback mode".

Exit SD Card Music Playing Mode
Press power button for mode shifting or pull out the SD card, can exit SD card playing mode, and shift to Bluetooth playing mode.

Note: Support music format: MP3, WAV, WMA.

Music data reading

1. Under Speaker power on status, use the speaker USB data cable in the package, plug it into the MICRO USB socket of speaker, and then connect the cable to the computer USB port, the speaker enters into data reading mode. Now use the computer file management to store or delete audio files in the SD card.
   
2. Read data by using special SD card reader.

Other Speaker Connection

Use a USB cable for connection.
Connect speaker to notebook, tablet PC, devices by using USB cable.

Power Charge

Use a computer USB port / power adapter to recharge the speaker. When battery is low, 80% power capacity can be recovered after two hours fast charging and it will take 3 hours to fully charge the speaker.

Notes for the Bottle Cleaning

Note: When clean the speaker bottle, please separate bottle and bottom speaker by counterclockwise rotation with a little force. Clean bottle separately to avoid part damage to the speaker.