Sylvania SPA154 - 15" Bluetooth Tailgate Speaker Manual

Packing list

Upon opening the package, please check for the following items:

1 x Speaker
1 x Instruction manual
1 x Adaptor
1 x Micphone
1 x Remote
1 x AUX in cable

Do's and Don'ts

• Do not play music at excessive levels as damage to hearing and / or equipment may result.
• Do not use outdoors in wet or in damp surroundins.

Specification

Input: DC 9V
Drivers: 15"Full Range
FM: 87.5~108.0 MHz
Battery Capacity: 2000mAh
Transmission Distance: 10m
Unit dimensions: (WxHxD): 400x600x310mm

Note
This unit may be submitted to changes in specifications, characteristics and/or operation without prior notice to the user, in order to continue improving and developing its technology.

Product overview

1. DC interface (9V)
2. Charging Indicator
   RED=Charging
   Light off = Fully Charged
3. Power/VOLUME -&+
4. ECHO: Echo volume adjustment
5. MIC.VOL:Microphone volume control
6. Previous track&TWS (Wirless Bluetooth Connection: under bluetooth mode, press TWS button for around 3 seconds to pairing another TWS speaker; Under FM mode, lightly press Play/Pause&TWS to enter into automatic scan and all the scanned radio stations will be saved automatically.)
7. Play/Pause&PLAY REC
8. Next track
9. MODE/LED ON(Long press to turn on/off light; Lightly press to enter into selection for Bluetooth, FM Radio, AUX Input, USB,TF)
10. TF/USB input
11. AUX input
12. MIC input

REMOTE CONTROL

1. Power button
2. Play/ Pause
3. EQ sound effect mode button
4. USB/RADIO Numeric button( pick the song/station program you want )
5. Mode button(Press to enter into selection for Bluetooth, FM Radio, AUX Input, USB,TF)
6. Mute button
7. Previous
8. Next
9. Volume +/-
10. Single Repeat (For USB/TF card playing mode)
11. USB/TF button

POWER SOURCE

1. Please charge the unit at least 4 hours before first time using.
2. Twist the dial clockwise/anticlockwise to switch on/off the unit.

CHARGE THE BATTERY

Battery symbol rapid flashing RED when charging, battery symbol stay RED after fully charged.

1. Connect the charge cable to the DC IN interface of thespeaker firmly.
2. When the battery is fully charged, please disconnect the charge cable from the speaker.
3. The speaker works normally when charging.

POWER/VOLUME

Twist the dial clockwise/anticlockwise to increase/discrease the mus volume.

PREVIOUS/NEXT BUTTON

Under playing status, press PREVIOUS/NEXT button to get back to a previous or next song.

PAUSE/PLAY BUTTON

To stop playing the current track, please press

PAUSE/PLAY button on the control panel. Press it once again to continue playing.

MODE/LED ON

Lightly press to enter into playing mode selection(Bluetooth, FM Radio, AUX IN,USB,TF).

TWS: (True Wireless Speaker)

It needs two speakers to make a TWS. When you had two speakers, you can make a TWS as below steps:

1. Don't connect to this speaker with Bluetooth devices.
2. Turn on both speakers and press the mode button to changeto Bluetooth mode.
3. Press and hold the TWS button, the display shows 't on' thatmeans the TWS on and it will enter to pairing mode. It will have a tone coming out after both speakers connected together. (If you want to turn this TWS off, press and hold again, the display shows 't off', It will be disconnected TWS connection).
4. Turn the Bluetooth devices to search the Bluetooth name"Syl SPA154" and tap to connect it. It will have a tone coming out from this speaker after connected successfully.
5. Now you can play the music form your Bluetooth devices.

AUX IN JACK

1. Connect an audio cable to the AUX IN JACK of the speaker and to the audio output socket on the external audio devices such as MP3 player, discman, etc, then select AUX by pressing the MODE/LED ON button on the control panel.
2. Play from an external audio device.

MIC IN JACK

Plug in microphone directly for playing.

USB JACK

Insert USB card directly for playing.

TF JACK

Insert TF card dirctly for playing.

Single Repeat

When palying USB/TF card, press this button to repeat a single track.
To cancle the single repeat, press the button again.

Playing recording function

1. After the portable speaker is turned on, insert the TF Card or U disk to the TF slot or USB port, press the Mode button to the Bluetooth mode, connect it with your Bluetooth device and paly the music, long press the REC button around 3 seconds, you will here a prompt voice "ding" means the TF card/USB is starting recording, long press the play/pause button for 3 seonds again and you will here prompt voice"ding ding", that means stop recording.
2. If you want to play this recording sound, press the Mode button to the USB or TF card mode, press the next button to find out this song and play it. Note:
   1. When your TF card and U disk insert to the speaker at sametime, it will record to your U disk when recording.
   2. The recording only works in Bluetooth mode, can not recordin FM, Aux mode and can't record Microphone's sound.
   3. It's better to turn the Bleutooth devices volume to maximumduring recording.
   4. It will be stopped recording when pressing the mode buttonduring recording.

FM FUNCTION

Lightly press MODE/LED ON button to switch to FM mode. Press PLAY/PAUSE button on control panel for automatic searching and saving the radio stations, by pressing PREVIOUS or NEXT you can select a previous or next radio station. Press 0~9 from remote to choose the FM stored sataion.

Bluetooth

Short press MODE button on control panel to select Bluetooth mode. Simultaneously turn on the Bluetooth setting on your phone, tablet or any other bluetooth enabled audio device and select "Syl SPA154"(no need to match code), the unit and device will then connected via Bluetooth. Press the "NEXT SONG" and "PREVIOUS SONG" button on the control panel to select the song, press " PLAY/PAUSE" button to control the playing status.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Sylvania SPA154 - 15" Bluetooth Tailgate Speaker Manual