Certifications Two (2) fibers Detachable DisplayPort Extender Pictorials Figure 1 – Overall Connection of DPFX-100-TR Figure 2 – Position of the LED Figure 3 – Fiber numbering & Caution on both fiber ports Figure 4 – Connection of optical fiber...
Welcome! System Requirements for Setup Congratulations on your purchase of the two (2) fibers DisplayPort extender, DPFX-100-TR. This manual contains information that will assist you in Hardware requirements □ installing and operating the product. ▪ You must have a DisplayPort source and display. It should...
Installation Note1: The maximum extension length by multi-mode fiber is 200 meters. Note2: It is recommended NOT to use any intermediate cable or adapter Important: Please keep the installation procedure below. Improper or no between them to avoid undesirable performance degradation. operation may result if the start-up sequence is not correctly followed.
Troubleshooting Maintenance The display shows black screen. No special maintenance is required for the optical system cables and power - Ensure that all plugs and jacks used by USB power cables or external power supplies. Ensure that the cables and power modules are stored or used in a supplies are firmly connected.
Product Specifications Warranty Information Compliance with DisplayPort standard: supports DP 1.1a 1 (One) Year Warranty Extension limit: 200m (656feet) for WQXGA (2560x1600) at 60 Hz Opticis warrants this optical DP module to be free from defects in workmanshi and 4K (3840x2160) at 30 Hz refresh rate over two (2) LC multi- p and materials, under normal use and service, for a period of one (1) year fro mode fibers (50/125um).
Need help?
Do you have a question about the DPFX-100-TR and is the answer not in the manual?
Questions and answers