Table of Contents
Advertisement
Quick Links
© 2015 Opticis Co., Ltd. All Rights Reserved
Revision 1.1 2, Jan, 2015
www.opticis.com
Two (2) PCs Switchable Dual-head
Opticis Locations
DVI Optical KVM Extender,
Headquarters
KVMX-100-TR
Opticis Co., Ltd.
# 16Fl, Kins Tower
8 Sungnam-daero, 331 beon-gil,
Bundang-gu,
Seongnam-si, Gyunggi-do, 463-844
South Korea
Te l: +82 (31) 719-8033
User's Manual
Fax: +82 (31) 719-8032
www.opticis.com
For order support, please contact your Distributor or Reseller.
For technical support, check with the Opticis web site www.opticis.com or
contact techsupp@opticis.com.
Doc No. : OKM-D150102-KVMX-100 / Rev1.1
Advertisement
Table of Contents
Related Manuals for Optics KVMX-100-TR
Summary of Contents for Optics KVMX-100-TR
- Page 1 © 2015 Opticis Co., Ltd. All Rights Reserved Revision 1.1 2, Jan, 2015 www.opticis.com Two (2) PCs Switchable Dual-head Opticis Locations DVI Optical KVM Extender, Headquarters KVMX-100-TR Opticis Co., Ltd. # 16Fl, Kins Tower 8 Sungnam-daero, 331 beon-gil, Bundang-gu, Seongnam-si, Gyunggi-do, 463-844 South Korea Te l: +82 (31) 719-8033 User’s Manual...
-
Page 2: Table Of Contents
Figure 2 – Connection Diagram for two (2) PCs, equipped both local and remote side displays and then determines the lowest resolution of them. It makes the installation of KVMX-100-TR easy and flexible at any variable each DVI port resolutions. -
Page 3: Connection Diagram
Connection Diagram System Requirements for Setup Hardware requirements This page describes the connections on the KVMX-100 Transmitter (Tx) and Receiver (Rx). You have a graphic controller card with a DVI port in your Windows/Mac (Mac is option), or SUN system. It should support the maximum graphic resolution feature of the display to be connected. -
Page 4: Installation
Step 9 If the connectors are fully engaged, two (2) displays will be shown. Note3: KVMX-100-TR reads EDID information of both local side and remote side displays and then, determines the lowest resolution of them for easy and flexible installation (Auto-mix EDID programming). -
Page 5: Switch Operation Guide
PC-2 through the display, connected to DVI-2 OUT of the Transmitter. Note: It is very useful to switch and control when KVMX-100-TR and displays are located far. On the contrary, if setting the switch from the PC-2 to the PC-1, the status LED (blue) of the PC-1 will be turned on, and you can control the PC-1 through the display, connected to DVI-1 OUT. -
Page 6: 1-8 Troubleshooting, Maintenance, Technical Support
Troubleshooting Product Specifications The display shows only black screen. KVMX-100-TR Optical KVM Extender - Ensure that all plugs and jacks used by external power supplies (both OPTICAL INTERCONNECTION Opticis and others) are firmly connected. Ensure that the related LED ON. -
Page 7: Features
Supports two (2) single-link DVI displays up to WUXGA (1,920x1,200) resolution at 60Hz. Note: Opticis will provide the setup and firmware file, if the KVMX-100-TR program needs to be updated. Transmits DVI, USB HID, RS232 and audio signal up to 1km (3280feet) over two (2) duplex LC optical fibers. - Page 8 Step 9 Operate Download GUI and select Comport to select communication port of PC. Then, click “Download” button. Step 13 Please close the program and reboot KVMX-100-TR to run it under new firmware program. 1-13 Firmware download 1-12 Firmware download...
- Page 9 Warranty Information up 1 (One) Year Warranty Opticis warrants this KVMX-100-TR to be free from defects in workmanship and materials, under normal use and service, for a period of one (1) year from the date of purchase from Opticis or its authorized resellers.
Need help?
Do you have a question about the KVMX-100-TR and is the answer not in the manual?
Questions and answers