Checking The Install Site - LG A1 Series Installation Manual

3-2 Checking the Installation Site
• Check whether the target site of installation meets the following requirements.
• Do not install AC modules near highly combustible structures or materials.
• Do not install AC modules where the maximum ambient temperature exceeds 65°C (149℉).
• Do not install AC modules at a place under direct exposure to salt water or ammonia.
• Do not install AC modules at a place easily accessible to people.
• Do not install AC modules indoors or on a moving vehicle.
• In an environment having frequent lightning storms, an auxiliary grounding may need to be
established by installer, which is connected directly from the AC module system to the ground.
• If the target installation structure lies on an uneven surface, do not forcefully modify the module
to fit in the structure. Make sure that the installation structure has been set up to provide a flat
surface. Unreliable structures may cause damage to the product during and/or after installation.
Rev. 1.5
AC Module System Installation Manual
11