Table of Contents
Advertisement
Basic settings
en
QBasic settings
T here are various settings available to you in order to
B a s i c s e t t i n g s
help use your appliance effectively and simply. You can
change these settings as required.
List of basic settings
Depending on the features of your appliance, not all
basic settings will be available.
Basic setting
Audible signal duration upon
™‹‚
completion of a cooking time
or timer duration
Amount of time until a setting
™‹ƒ
is applied
Button tone that sounds
™‹„
when a button is touched
Brightness of the display illu-
™‹...
mination
Display time of day
™‹†
Enable childproof lock activa-
™‹‡
tion?
Interior lighting on when
™‹ˆ
appliance in operation?
Cooling fan run-on time
™‹‰
Telescopic rails retrofit-
™‹Š
ted?**
Sabbath mode available?
™‚‹
Reset all values to factory
™‚ƒ
settings?
* Factory setting (factory settings may vary depending on the appli-
ance model)
** Not available for all appliance types.
--------
20
Options
‚ = approx. 10 seconds
ƒ = approx. 30 seconds*
„ = approx. 2 minutes
‚ = approx. 3 seconds*
ƒ = approx. 6 seconds
„ = approx. 10 seconds
‹ = off
‚ = on*
‚ = dark
ƒ = medium*
„ = bright
‹ = hide the time
‚ = display the time*
‹ = no
‚ = yes*
ƒ = yes, with locked door**
‹ = no
‚ = yes*
‚ = short
ƒ = medium*
„ = long
... = extra long
‹ = no* (for rails and single
pull-out system)
‚ = yes (for double and triple
pull-out systems)
‹ = no*
‚ = yes
‹ = no*
‚ = yes
Changing the basic settings
The function selector must be set to the "Off" position.
Press and hold the v button for approximately
1.
4 seconds.
The first basic setting will appear on the display,
e.g. ™‹‚ ‚.
Turn the temperature selector to change the setting
2.
as required.
Use the @ button to navigate to the next basic
3.
setting.
Using the A or @ button, continue going through all
4.
the basic settings as described above, changing the
settings if necessary using the temperature selector.
When you have finished, press and hold the
5.
v button again for approximately 4 seconds to
confirm the settings.
All basic settings have now been applied.
You can change the basic settings again at any time.
Your changes to the basic settings will be
Note:
retained even after a power failure.
Advertisement
Table of Contents
