Operating The Oven Gas Burner - Samsung NX52T3510LV Manual

Operating the oven gas burner
Switching on the oven
gas burner
(NX52T7522LS)
Switching on the oven
gas burner
(NX52T5511 LS, NX52T351 OLV)
Switching off the oven
gas burner
If the flame goes out
If you wish to heat your oven in the conventional way,
use the oven gas burner.
1.
Open the appliance door.
2.
Press the control knob for the oven, turn it
counter-clockwise to position 250°C and
Keep the control knob pressed for a few seconds
with pushing the sparking button until the flame
has stabled.
Then carefully close the appliance door.
3.
Set the required temperature using the control
knob. Do not turn the knob beyond 140.
1.
Open the appliance door.
2.
Press the control knob for the oven, turn it
counter-clockwise to position 1 and Keep
the control knob pressed for a few seconds
with pushing the sparking button until the flame
has stabled.
Then carefully close the appliance door.
3.
Set the required temperature using the control
knob. Do not turn the knob beyond 4.
When the dish is ready, slightly press the control
knob and turn it clockwise to position 0 .
Switch off the control knob. Wait one minute and
switch the burner on again.
&
If the flame goes out. gas will escape. Never leave
the gas burner unattended during operation.
Ensure that there are no draughts.
EN-31