Download Print this page

Protech Systems SP-6205 Quick Reference Manual page 2

Advertisement

System View
(Take SP-6209 for example.)
Front View
I/O View - TOP
CFAST
SIM Card
I/O View - Bottom
USB3.0 LAN2
Mic IN
COM3
COM1
VGA
Line
OUT
COM4
COM2
LPT
The following messages are safety reminders on protecting your system from damages and
extending a long life of the system.
1. Check the Cable Voltage
The range of operating voltage should be between DC 9V and 36V. Otherwise, the system
could be damaged.
2. Environmental Conditions
Place your SP-6205/6207/6209 on a sturdy & level surface. Be sure to allow enough space
to have easy access around the system.
Avoid extremely hot or cold place to install the system.
Avoid exposure to sunlight for a long period of time or in a airtight space. Also, avoid the
system from any heating device or using SP-6205/6207/6209 when it's been left outdoors
in a cold winter day.
Avoid moving the system rapidly from a hot place to a cold one and vice versa because
condensation may come from inside of the system.
Place SP-6205/6207/6209 in strong vibrations may cause hard disk failure.
Do not place the system close to any radio active device in case of signal intereference.
Rear View
Side View
SP-6205
SP-6207
LAN1
DIO
SP-6205/6207/6209
15"/17"/19"
Cut-Out Dimension:
(Unit: mm)
SP-6205
SP-6207
SP-6209
SP-6209
3. Handling
Avoid putting heavy objects on top of the system.
Do not turn the system upside down. This may cause the hard drive to mal-function.
If water or other liquid spills into this product, unplug the power cord immediately.
4. Good Care
When the outside of the case is stained, remove the stain with neutral washing agent with
a dry cloth.
Never use strong agents such as benzene or thinner to clean the system.
If heavy stains are present, moisten a cloth with diluted neutral washing agent or alcohol,
and then wipe thoroughly with a dry cloth.
If dust has been accumulated on the outside, clean with a special vacuum cleaner made
for computers.
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the manufacturer. Dispose of used batteries per the manufacturer's instructions.
WARNING! Some internal parts of the system may have high electrical voltage. Therefore we strongly
recommend qualified engineers open and disassemble the system. The LCD and touch screen are easily
breakable, please handle them with extra care.
Fanless Panel PC
Wall Mount
385.5
372
130
421.5
405
138
449
436
276
92
Safety Precaution
All Rights Reserved. Copyright 2013
Wall
Wall
Wall

Advertisement

loading

This manual is also suitable for:

Sp-6207Sp-6209