Cadillac Escalade Two-mode Hybrid 2010 Manual page 100

The tire sealant and compressor kit has an accessory
adapter located in a compartment on the bottom of its
housing that may be used to inflate air mattresses,
balls, etc.
6-52
Removal and Installation of the Sealant
Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
3. Pull up and remove the canister.
4. Replace with a new canister which is available
from your dealer/retailer.
5. Push the new canister into place.
2. Press the canister
release button.