Troubleshooting - AEG DVD 4552 LCD Instruction Manual

Troubleshooting

Consult the following table to troubleshoot errors prior to sending the device to customer service.
Errors Cause
Network display light Lack of power supply
not on
No power supply/ main switch
turned off
No screen display TV operation:
Video cable incorrectly connect-
ed.
No DVD/CD inserted
DVD/CD incompatible
DVD/CD placed upside down
into CD/DVD-compartment
CD/DVD is soiled
CD/DVD is damaged
Default settings incorrect
Child safety is activated
No reaction upon Power supply issues or static
pressing charge of the device.
NOTE:
In case you forget your password you can deactivate the parental lock
with the master password.
Follow these steps to change the password:
1. Enter the current password with the numeric buttons (Fig. 3/22) on
the remote control in the field "Old Password".
The screen shows "XXXX" to avoid that unauthorized person can
read the password.
2. Enter the new password with the numeric buttons on the remote
control in the field "New password".
3. Enter the new password again in the filed "Confirm Password". Press
ENTER (Fig. 3/18) to confirm.
Solution
WARNING:
Turn off the device prior to troubleshooting.
Check if the mains plug is connected correctly. If necessary,
test the outlet with another device for functionality.
Turn the unit back on again with the main switch
(Fig. 1/16; 2/2).
WARNING:
Turn of the device prior to troubleshooting.
Check the proper position of the video cable. Check if the
plug is plugged tightly into the out let.
Insert CD/DVD.
Use compatible media only.
Turn CD/DVD around.
Clean CD/DVD.
Use another CD/DVD.
Check the default settings of the DVD-Players.
Deactivate child safety.
Turn off the main switch and disconnect the mains plug. Re-
connect mains plug and turn device on.
English
59