Download Print this page

Craftsman 136.748270 Operator's Manual page 7

Electric lower/vac 225 mph blower/375 cfm vac

Advertisement

Available languages

Available languages

thefabric ofthebag, s uch aswires,
staples, nails, orrocks
Important: Vacuum o nlyleaves a ndsoft
items. H ard items such assticks, rocks,
acorns, andpine cones w illdamage t he
impeller
Important: Donot f orce thevacuum tube
intoapile ofdebris o rhold thetubeupright
while force feeding d ebris i ntothetube.
Either action may cloganddamage the
impeller I fthevacuum starts tovibrate o r
make abnormal noise, stop it,unplug the
cord, a ndcheck f orthecause,
Emptying t he
Bag
1.
Turn off and unplug the vacuum from
the power source..
2.
Unzip and empty any debris from the
bag.
_
_._ _,
Do not store debris in the bag., To clean
the bag, turn it inside out and shake out
any excess debris, Once a year, hand
wash the bag in soapy water and allow
it to air dry
_t, DANGER:
Normal usage of the
bag causes it to wear and deteriorate
over time, A worn or deteriorated
bag allows
small objects
to be
thrown
through
the bag, possibly
injuring
the operator
or bystanders°
Check the bag frequently.
If it is
worn or deteriorated,
replace it with
a genuine Craftsman vacuum bag;
refer to the Replaceable Parts List.
Double*insulated
Appliances
tn a double-insulated
appliance, two
systems of insulation are provided instead
of grounding.
No grounding means is
provided on a double-insulated
appliance,
nor should a means for grounding be
added to the appliance
Servicing a
double-insulated
appliance requires
extreme care and knowledge of the
system, and should be done only by the
qualified service personnel at your Sears
Service Center (refer to the back cover).
Replacement parts for a double-insulated
appliance must be identical to the parts they
replace. A double-insulated
appliance is
marked with the words "Double Insulation"
or "Double Insulated.." The symbol (square
within a square) []
may also be marked on
the appliance.
Removing Clogged
Debris from the
Impeller
I.,
Turn off and unplug the vacuum from
the power source and wait for all
moving parts to stop.,
7

Advertisement

loading