Bagging The Clippings; Side-Discharging The Clippings - Toro Recycler 20379 Operator's Manual

Bagging the Clippings

Use the grass bag when you want to collect grass and leaf clippings from the lawn.
If the side-discharge chute is on the machine, remove it; refer to
Installing the Grass Bag
1. Raise and hold up the rear deflector (A of
2. Install the grass bag, ensuring that the pins on the bag rest in the notches on the handle (B of
3. Lower the rear deflector.
Removing the Grass Bag
1. Raise and hold up the rear deflector.
2. Lift the grass bag off of the notches on the handle.
3. Lower the rear deflector.

Side-Discharging the Clippings

Use side discharging for cutting tall grass, thick grass, or conditions where recycling does not work well.
If the grass bag is on the machine, remove it; refer to
Installing the Side-Discharge Chute
Lift up the side deflector and install the side-discharge chute (A and B
Removing the Side-Discharge Chute
To remove the side-discharge chute, lift up the side deflector, remove the side-discharge chute, and lower the
side-discharge deflector.
Removing the Side-Discharge Chute (page
Figure 15).
Figure 15
Removing the Grass Bag (page
Figure
Figure 16
14
Figure
14).
16).
14).
15).
g235812
g233435