Step 2: Charging The Battery Pack - Sony HANDYCAM HDR-SR7E Operating Manual

Step 2: Charging the battery pack

4
Battery pack
You can charge the "InfoLITHIUM"
battery pack (H series) after
attaching it to your camcorder.
b Notes
• Your camcorder operates only with an
"InfoLITHIUM" battery pack (H series).
1
Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
Be sure that the v mark on the DC plug
is facing up.
2
Connect the mains lead to the AC
Adaptor and the wall socket.
3
Slide the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
4
Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
6
5
DC IN jack
DC plug
3
POWER
switch
1
/CHG lamp
2
AC Adaptor
Mains lead
5
Set the camcorder onto the
Handycam Station securely.
The /CHG (charge) lamp lights up and
charging starts. The /CHG (charge)
lamp turns off when the battery pack is
fully charged. Remove the camcorder
from the Handycam Station.
To remove the battery pack
Slide the POWER switch to OFF (CHG).
Slide the BATT (battery release) lever and
remove the battery pack.
BATT (battery
release) lever
b Notes
• When you remove the battery pack or the AC
Adaptor, make sure that the
(Still) lamp (p. 8) is turned off.
5
To the
wall socket
(Movie) lamp/