Editing; Dubbing A Tape - Sony video HI8 XR CCD-TRV87 Hi 8 Operating Instructions Manual

— Editing —

Dubbing a tape

Using the A/V connecting cable or S video connecting cable
(not supplied)
Connect your camcorder to the VCR using the A/V connecting cable supplied with
your camcorder.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
(2) Set the input selector on the VCR to LINE.
(3) Set the POWER switch to VTR (CCD-TRV87) or PLAYER (CCD-TRV37/
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
CCD-TRV37/TRV47/TRV57/TRV67
7 T R V 6 C C D -
: Signal flow
* CCD-TRV67 only
CCD-TRV87
: Signal flow
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
To prevent deterioration of pictures from dubbing
Set EDIT to ON in the menu settings before dubbing.
52
the recorded tape into your camcorder.
Refer to the operating instructions of your VCR for more information.
TRV47/TRV57/TRV67).
Refer to the operating instructions of your VCR for more information.
S VIDEO*
VIDEO OUT
AUDIO OUT
S VIDEO
VIDEO
AUDIO
IN
VIDEO
AUDIO
IN
S VIDEO
VIDEO
AUDIO