Confirming the Completion of
the Installation
Check the following points.
The cord and the cable are not twisted or
pinched.
WARNING
Improper placement of the AC power cord, etc. may
cause fire or electric shock through a short circuit. Be
sure to confirm the completion of the installation for
safety.
Other Information
When removing the TV or LCD Display, reverse
the previous installation procedure.
WARNING
Two or more persons (three or more persons for
189.3 cm (75 inches) and above TV or LCD Display) are
needed to transport a large TV or LCD Display.
Attaching the Wall-Mount
Bracket to the Solid Concrete or
Concrete Block
WM1
Installing the Wall-Mount
Bracket to the Wall
1
Decide on the installation
location.
Make sure that the wall has enough space
for the TV or LCD Display and is capable of
supporting a weight of at least six times
that of the TV or LCD Display.
• Refer "Measurement for Wall-Mount
Bracket installation on the wall" on page
20.
• Refer to your TV's or LCD Display's
Reference Guide for the TV's or LCD
Display's weight.
Note
When your TV or LCD Display is installed on the
wall, the upper side of the TV or LCD Display
slightly leans forward.
We recommend you to check the position of TV or
LCD Display in the viewing environment.
2
Align
WM1
four marks.
× 4
Note
Use a level to check whether
− 13 (EN) −
to the wall and make
WM1
WM1
is level.
EN