Table of Contents
Advertisement
Intended Use
The soft wash brush is intended for use with bleach concentrations of 3% or less.
APPLYING CHEMICALS:
Hazardous chemicals must be handled with caution as directed throughout this manual and on
the chemical label.
Always rinse the brush after each use to clean the chemical out of the lance, brush head, and
coupler. The life of the brush will be shortened if it is not rinsed after each use.
WE RECOMMEND THAT THE BRUSH NOT BE USED FOR OTHER PURPOSES
ONCE IT HAS BEEN USED WITH BLEACH. Any chemical will leave some residual, even
after the brush has been properly cleaned. These residual chemicals can have unexpected effects
on future uses.
NOTE: The brush will be damaged, and warranty voided, if used to apply any petroleum-based
product (gasoline, diesel, kerosene, or oil).
NOTICE: Not for use on painted wood surfaces. Use only on hard, non-porous surfaces.
Contact NorthStar Product Support at 1-800-270-0810 for any questions
about the appropriate use of the brush.
4
Advertisement
Table of Contents
