Table of Contents
Advertisement
Operation - Using the Brush (continued)
Step 3: Clean brush and decontaminate after use.
When finished using the brush, it is important to clean the brush and decontaminate yourself.
• Clean-up and decontamination procedures must be followed after each use.
• Improper equipment clean-up and disposal of chemicals can result in
dangerous chemical exposure to humans and the environment, as well as
equipment damage.
• Personal decontamination is required after use to minimize unsafe exposure to
chemicals and potential illness.
Rinse brush
WARNING
A general procedure is as follows:
a) Add fresh water to the system.
b) Operate the system and discharge all rinse water onto a hard surface such as a
driveway.
c) Use a garden hose to rinse off bristles.
d) After rinsing, disconnect power and be sure all system pressure is relieved.
12
Advertisement
Table of Contents
