Craftsman 50280 Operator's Manual

Craftsman 50280 Operator's Manual

Hydraulic bottle jack 2/6 tons capacity

Advertisement

Operators Manual
HYDRAULIC BOTTLE JACK
9
Model
50280 - 2 Ton Capacity
9
Model
50282 - 6 Ton Capacity
• Safety
• Assembly
• Operation
• Maintenance
• Parts
BEFORE using this product, read this manual
!
and follow all its Safety and Operating
instructions. Failure to do so may result in
personal injury and/or property damage.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Visit our Craftsman website: www.sears.com/craftsman
U.S. Patent: 5,946,912
Printed in China

Advertisement

Table of Contents
loading

Summary of Contents for Craftsman 50280

  • Page 1 Operators Manual HYDRAULIC BOTTLE JACK Model 50280 - 2 Ton Capacity Model 50282 - 6 Ton Capacity • Safety • Assembly • Operation • Maintenance • Parts BEFORE using this product, read this manual and follow all its Safety and Operating instructions.
  • Page 2: Table Of Contents

    Service CRAFTSMAN ONE YEAR FULL If this Craftsman product fails due to a defect in material or workmanship within one year from the date of purchase, return it to any Sears store or other Craftsman outlet in the United States for free replacement.
  • Page 3: Safety Instructions

    • Study, understand, and follow all instructions provided with and on this device before use. • Do not exceed rated capacity. • This is a lifting device only. • After lifting, immediately transfer the load to appropriately rated vehicle stands. •...
  • Page 4: Assembly

    CARTON CONTENTS Inside the box, you will find (see Fig. 1): 1. A jack 2. A rubber handle holder 3. A 2-piece handle Jack Rubber handle holder 2-piece handle A. Handle B. Handle Socket C. Oil Filler Plug D. Saddle E.
  • Page 5 KNOW YOUR JACK (refer to Fig. 3, page 4) • Compare these illustrations with your jack BEFORE operation and/or oil level maintenance to become familiar with the location of various jack components. BEFORE USE Occasionally during shipment and/or handling, air gets trapped in the hydraulic s y s t e m , w h i c h i n t e r f e r e s w i t h j a c k performance.
  • Page 6: Specifications

    3. After removing jack from under the load, push saddle down to reduce ram exposure to rust and contamination. MAINTENANCE 50280 2 Tons 3-3/4 in. X 3-3/4 in. 4 in. X 4-1/2 in. 13-11/16 in. (348mm) 16-13/16 in. (427mm) 7-1/4 in.
  • Page 7: Storage

    MAINTAINING OIL LEVEL Important: When adding or replacing oil, ALWAYS use a good grade Hydraulic Jack oil. DO NOT use Hydraulic Brake Fluid, Alcohol. Glycerine, Detergent, Motor Oil or dirty oil. Use of an improper fluid can cause serious internal damage to your jack. ADDING OIL •...
  • Page 8: Troubleshooting

    The Model Number and Serial Number are found on the jack label and handle socket. Always mention the Model Number and Serial Number when requesting service or repair parts for your jack. 2 TON : 50280 6 TON : 50282 AVAILABLE REPLACEMENT PARTS Model No.
  • Page 9 Get it fixed, at your home or ours! For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself.

This manual is also suitable for:

50282

Table of Contents

Save PDF