Philips C Line 75BDL6051C User Manual page 49

2. After showing Logo
3. Power state is not Power Off
The options are:
{Off}, {All}, {Failover}
{Off}: Disable Auto signal detection
{All}: OPS -> HDMI1 -> HDMI2 -> HDMI3 -> HDMI4 ->
DisplayPort -> DVI-D ->USB-TypeC -> VGA -> Media Player
-> SmartCMS -> Home
{Failover}:
- Failover 1: OPS(default)
- Failover 2: OPS(default)
- Faliover 3: OPS(default)
- Failover 4: OPS(default)
- Failover 5: OPS(default)
- Failover 6: OPS(default)
- Failover 7: OPS(default)
- Failover 8: OPS(default)
- Failover 9: OPS(default)
- Failover 10: OPS(default)
- Failover 11: OPS(default)
- Failover 12: OPS(default)
The Failover behavior is when signal lost, the display will go
to the next available source which is defined in priority list in
order.
Please note, the followings will suspend failover, and the
failover will resume when signal lost again.
- Boot On Source : When the display power on, it will go
to the source defined in this OSD option.
- Scheduler: When the display power on by scheduler,
it will go to the corresponding source according to the
current time.
- User operation: No matter what current source it is,
when user manually change source, the failover will
suspend.
To make sure failover starting from the 1
power on, please set the 1
too.
Language
Select the language used in the OSD menu.
The options are: English/Deutsch/ 简体中文 /Français/
Italiano/Español/Pyccкий/Polski/Türkçe/ 繁體中文 / 日本語
/Português/ /Danish/Swedish/Finnish/Norwegian/
Dutch.
st
priority source after
st
priority source as boot on source
Power Save
Mode 1 [TCP off, WOL on, auto off]
Mode 2 [TCP off, WOL on, auto on/off]
Mode 3 [TCP on, WOL off, auto on/off]
Mode 4 [TCP on, WOL off, no auto on/off]
Power save modes
Mode 1: DC off -> Power off. LED: Red.
Power Save -> Power off, LED: Red
Mode 2: DC off -> Power off, LED: Red.
Power Save -> Power Saving. LED: Orange. Can be woken
up.
Mode 3: DC off -> Back light off, LED: Red
Power Save -> Back light off, LED: Orange. Can be woken
up.
Mode 4: DC off -> Back light off, LED: Red
Power Save -> Will not enter power save mode. show "no
signal" only.
RCU Power
Button Off
Mode 1 DC OFF
Mode 2 DC OFF
Mode 3 Backlight
OFF
Mode Backlight
4 OFF
Following table is the action for Android board with
different power mode.
DC off/on: press power button by RC
Power mode in Mode 1/2 Mode 3/4
OSD
DC off shutdown 1. The current source APK(such
DC on Boot up
OPS settings
Set the OPS configuration under each power condition.
• {Auto} - After selecting {Card OPS} for video source
input, the OPS will be set to off when the display power
is set to off, or vice versa. If you set to other video source
inputs, the OPS will always be set to on.
• {Always off} - The OPS will always be set to off.
• {Always on} - The OPS will always be set to on.
Advanced option reset
Reset all settings in the Advanced option menu to factory
preset values.
1. Press [SET] or [ ] button to enter the submenu.
2. Press [ ] or [ ] button to select {Reset} and press the
[SET] button to restore settings to factory preset values.
37
75BDL6051C 86BDL6051C
No Signal Android
DC OFF board power
off
when signal is back, board power
system wake up off
Backlight OFF keep power
on
Backlight ON, show no keep power
signal on
as MediaPlayer, Broswer or
SmartCMS) will be closed.
2. Android system will go to
the default black launcher.
1. Android system reboots