Trouble Shooting
• Mainboard not work
• 1. Check the "power board " in
main‐board whether has 12V and
5V 5vsb output .
• 2.Verify if the DC/DC convertors
have the right output (1.18V,1.5V)
• 3.Verify if LDO have the right
output (3.3V,1.2V)
• 3.Verify if the
Mainchip(MSD6308RTEM), DDR,
AudioAMP...solder well;
• 4.Verify if the FLASH(U1202) has
the right software and work well;
• 5.Verify if the Y201(Crystal) has
the right frequency
Panel not work
1. Check the LED Back light "set‐up IC "
output and input are working .
2.Verify if the Mainboard output the
right On/Off signal to power board;
3.Verify if the Mainboard output the
LVDS singal to panel T‐con board
4.Verify if the software is the right
version of this model.
5.Change the LVDS wire to check if it's
broken.
- 61 -