Haier LE40K5000TF Service Manual page 48

Operation
4.4 Signal/CI Info
Signal / CI Info
Signal Information
CI Information
Move OK Enter MENU
This menu can display the signal and CI information.
5. SYSTEM MENU
1). Press the MENU button and then press the◀▶buttons to
select the SYSTEM menu.
2). Press the ▼button to enter the SYSTEM submenu,
3) Press the◀▶ buttons to select
Language/Network/N+Smart/Time/Lock System/Advanced
Option and then press OK to confirm.
SCENE SCALE ENERGY
Language Network N+Smart Time Lock System Advanced Option
5.1 Language
1).Press the ◀▶ buttons to select the Language menu then
press the OK button to enter the language submenu.
2).Press ◀▶/▲▼buttons select the OSD language.
OSD Language
English French
Spanish German
Russian Polish
MENU
5.2 Network
1).Press the◀▶ buttons to select the Network menu then
press the OK button to enter the Network submenu.
2).Press the ▲▼ buttons to select submenu Network/Wired
Network/Wi-Fi Network and then press OK to confirm.
Network
Network Wired Network >
Wired Network Connected >
Wi-Fi Network
Move OK Enter
The Network submenu is show you that the current TV network
connected state (To connect Wired Network or Wi-Fi Network).
Network
Network Wired Network >
Wired Network Connected >
Wi-Fi Network
Move OK Enter
Press the ▲▼ buttons to select Wired Network then press OK
button to enter the Wired Network submenu.
TUNER SYSTEM
Italian
Dutch
Czech
>
MENU
>
MENU
- 46 -
Network Mode
Auto Connect
Manual Connect
Press the ▲▼ and OK buttons to select the Auto Connect,
and the Connect State will pop-up and the Connecting state
will display on the screen.
Connect State
Connecting......
Cancel
After connecting is complete, the screen will show below
that the wired network is connect success.
Connect State
Connect Success
Cancel
After the wired network is connect success that the network
state is display on the screen.
Network State
Network ID Wired Network
IP 192.168.0.103
Netmask 255.255.255.0
Gateway 192.168.0.1
DNS 192.168.0.1
Lan MAC Address 9c:44:3d:00:03:f4
WIFI MAC Address a0:f4:59:34:0a:cf
If the Wired Network is not connect, the Network State will
pop-up like list below.
Network State
Network ID Wired Network
IP
Netmask
Gateway
DNS
Lan MAC Address 9c:44:3d:00:03:f4
WIFI MAC Address a0:f4:59:34:0a:cf
Press the ▲▼ buttons to select the Manual Connect then
press OK button to select enter the Manual Connect submenu.
Network Mode
Auto Connect
Manual Connect
>
>
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
>
>