Page 1
Please review the manual carefully to ensure it is properly installation and to avoid injury. The ceiling used must have a minimum load bearing of 25KG. Guangzhou Grandview Crystal Screen Co.,Ltd. Guangzhou Grandview Creative Technology Co., Ltd. No.43,Guomao Road South , Hualong Town,Panyu District , Do not...
Trouble Shooting The Grandview GPCK-ME is designed for many years of use. Problems are usually caused by small issues or improper use. If there problems please refer to the follow trouble shooting list. If problems persist, please contact the authorized dealer or call 020-84899499 for technical support...
Maintenance and Adjustment Caution 1. Please fully retract the project lift after used to avoid the projector exposing to the air and dust, which may cause the adverse effect on the imaging. Warning: In order to minimize the risk of fire or electric shock, do not expose this apparatus to rain or 2.
Page 4
Figure25 Figure26 Figure27 2.External IR/RF remote control(Optional) Please purchase Grandview 3th Generation External IR/RF remote control(Optional) when RS232/485 Cautions for Location control required. Please keep away from hot resources, dirty, high temperature and high humidity. (1)Please fix the external Receiver box on the ceiling and ensure close to the lift.
Page 6
Construction for Projector Lift Installation Binding post Inlet hole 8.Choose front or inverted projection direction as required and install the projector accordingly. Installation hole Outlet hole Motor combo Frame Pulley Motor rack Limit positioning Right linkage Left linkage Figure12 Front installation of projector Figure13 Inverted installation of projector Figure14 Caution: Decorative ceiling plate can not bear any weights and must be fixed onto the multiorifice plate...
Specification Installation 15.3 Max. 300 519.4 15.2 Specifications ● 25KG GPCK-ME500P GPCK-ME1000P 25KG Wi re ho l e GPCK-ME2000P 25KG W600xD600x240 GPCK-ME3000P 25KG AC 110V~120V 60Hz or AC 220V~230V 50Hz,Currents:1.4A / 0.74A...
Page 8
Installation Instruction 3.Please stick the locating cardboard on the ceiling,then drill the ceiling by the guide hole of the This projector lift needs to be recessed into the ceiling,and this instruction shows us the grille-ceiling cardboard. Then mount the lift and fasten by included M8X80 anchor screws,make sure the lift is fixed. as example.
Need help?
Do you have a question about the GPCK-ME500P and is the answer not in the manual?
Questions and answers