Table of Contents
Advertisement
Quick Links
Grandview Crystal Screen Canada Ltd.
#11- 3751 North Fraser Way,
Marine Way Business Centre,
Burnaby, BC, Canada V5J 5G4
Tel: 1-604-412-9777
Fax: 1-604-412-9796
Website: www.grandviewscreen.ca
Guangzhou Grandview Crystal Screen Co., Ltd.
P.O. 511400 Federal Ind. Zone No. 363, Yushan West Road,
Shiqiao, Panyu District, Guangzhou, Guangdong, China
Tel: +8620-8489-9499 Fax: +8620-8480-3343
Website: www.grandviewscreen.com
GRANDVIEW REPRODUCING GENUINE COLORS
Recessed-Ceiling
Motorized Projector Lift
Applicable Model
Maximum weight:
GPCK-ME500
25KG
GPCK-ME1000
25KG
GPCK-ME2000
20KG
GPCK-ME3000
15KG
GPCK-ME4000
15KG
Please read being installation:
Thank you for purchasing this product.
Please read the instruction manual
carefully to ensure this projector lift is
suitable for your installation environment.
Cautious
This product should only be installed by a qualified technician.
Warnings
Please review the manual carefully to ensure it is properly installation and to avoid injury.
The ceiling used must have a minimum load bearing of 15KG.
For projector lift assembly only
Caution
Instruction Manual
Please do not take apart the
Do not
Accessories of mounting bracket
take apart
Advertisement
Table of Contents
Related Manuals for Grandview GPCK-ME500
Summary of Contents for Grandview GPCK-ME500
- Page 1 Please review the manual carefully to ensure it is properly installation and to avoid injury. The ceiling used must have a minimum load bearing of 15KG. Grandview Crystal Screen Canada Ltd. Guangzhou Grandview Crystal Screen Co., Ltd. #11- 3751 North Fraser Way, P.O. 511400 Federal Ind. Zone No. 363, Yushan West Road,...
- Page 2 Trouble Shooting The Grandview GPCK-ME is designed for many years of use. Problems are usually caused by small issues or improper use. If there problems please refer to the follow trouble shooting list. If problems persist, please contact the authorized dealer or call 020-84899499 for technical support...
- Page 3 Maintenance and Adjustment Caution 1. Please fully retract the project lift after used to avoid the projector exposing to the air and dust, which may cause the adverse effect on the imaging. Warning: In order to minimize the risk of fire or electric shock, do not expose this apparatus to rain or 2.
- Page 4 Figure25 Figure26 Figure27 2.External IR/RF remote control(Optional) Please purchase Grandview 3th Generation External IR/RF remote control(Optional) when RS232/485 Cautions for Location control required. Please keep away from hot resources, dirty, high temperature and high humidity. (1)Please fix the external Receiver box on the ceiling and ensure close to the lift.
- Page 5 Installation Accessories 12.Before contacting the power cable of projector lift, please take out the wire cover in the back of lift ( Figure 18). Then choose the control option and connect the controlling wires to terminals( Figure 19- Φ Φ M4 Hxagonal Adjuster(1 pc) M5、M4、M3x20mm Screw(each 4pcs) Rubber Washer...
- Page 6 Turning clockwise to release belt and would lower height of right side. Inversely, turning counterclockwise to tighten belt and upper height of right side. GPCK-ME500/1000 GPCK-ME2000/3000/4000 Position of unfolding conveyor chain Position of unfolding conveyor chain Please make sure the adjusted nut after adjustment.
- Page 7 Suitable Overall Frame Maximum Model Suitable projector sizes weight (KG) Height (H3) projector size(H4) Height (H1) Height (H5) Upright: GPCK-ME500 0-500 15KG W300 x D 0 x H4 GPCK-ME1000 0-1000 15KG W460 x D240 x H4 Figure 10 穿线孔 Inverted:...
- Page 8 Installation Instruction 3.Please stick the locating cardboard on the ceiling,then drill the ceiling by the guide hole of the This projector lift needs to be recessed into the ceiling，and this instruction shows us the grille-ceiling cardboard. Then mount the lift and fasten by included M8X80 anchor screws,make sure the lift is fixed. as example.
Need help?
Do you have a question about the GPCK-ME500 and is the answer not in the manual?
Questions and answers