Table of Contents
Advertisement
Set the GPS switch to ON in advance.
Steps
(MENU)
[AUTO CLOCK ADJ]
ON
OFF
Notes
You must set the date and time on your camcorder before using your camcorder (p. 22).
There may be discrepancies of a few seconds even if [AUTO CLOCK ADJ] is activated.
The clock is adjusted automatically by [AUTO CLOCK ADJ] when you turn off your camcorder if the
camcorder is receiving a GPS signal while it is being used. The clock is not adjusted until the camcorder
is turned off. Also, the clock is not adjusted unless the camcorder is receiving a GPS signal, even if the
GPS switch is set to ON.
AUTO AREA ADJ (Auto area adjustment) (HDR-CX500V/CX520V)
Your camcorder will compensate for a time differences with the current area automatically
when it detects a time difference, by acquiring the current location information from GPS.
Set the GPS switch to ON in advance.
Steps
(MENU)
[AUTO AREA ADJ]
ON
OFF
Notes
You must set date and time on your camcorder before using your camcorder (p. 22).
DST SET/SUMMERTIME
You can change this setting without stopping the clock. Set to [ON] to move the time forward
1 hour.
Steps
(MENU)
[DST SET] or [SUMMERTIME]
OFF
ON
LANGUAGE SET
You can select the language to be used on the LCD screen.
[CLOCK/
LANG] (under
a desired setting
Adjusts the clock automatically.
Does not adjust the clock automatically.
[CLOCK/
LANG] (under
a desired setting
Compensates for the time difference with the current area automatically.
Does not compensate for the time difference with the current area
automatically.
[CLOCK/
LANG] (under
a desired setting
Does not set the DST SET.
Sets the DST SET.
[GENERAL SET] category)
[GENERAL SET] category)
[GENERAL SET] category)
Advertisement
Table of Contents
