Table of Contents
Advertisement
Steps
(MENU)
a desired setting
OFF
WIDE CONVERSION
(
)
TELE CONVERSION
( )
Note
The built-in flash is not flashed when [CONVERSION LENS] is set to [WIDE CONVERSION] or [TELE
CONVERSION], you cannot also set [FLASH MODE] (p. 85).
LOW LUX
You can record bright color images, even in dim light.
Steps
(MENU)
desired setting
OFF
ON ( )
FACE DETECTION
Detects the faces of your subjects and adjusts the focus/color/exposure automatically. Also,
it adjusts the image quality of face parts more finely, in the case of the high definition image
quality (HD) movies.
Steps
(MENU)
a desired setting
ON
OFF (
)
Notes
Faces may not be detected depending on recording conditions, subject conditions, and the setting of your
camcorder.
[FACE DETECTION] may not function properly depending on recording conditions. Set [FACE
DETECTION] to [OFF] in this case.
Tips
For better face detection performance, shoot the subject(s) under the following conditions:
Shoot in a sufficiently bright place
The subject(s) does not wear glasses, a hat or mask
[CONVERSION LENS] (under
Select this when you do not use a conversion lens.
Select this when you use a wide-conversion lens.
Select this when you use a tele-conversion lens.
[LOW LUX] (under
The LOW LUX function is not used.
The LOW LUX function is used.
[FACE DETECTION] (under
Detects faces.
Does not detect faces.
[SHOOTING SET] category)
[SHOOTING SET] category)
[SHOOTING SET] category)
7
a
Advertisement
Table of Contents
