Table of Contents
Advertisement
may appear with block noise when you play back the image.
Tips
See page 111 for the expected recording time of each recording mode.
You can select the [
REC MODE] for each recording media separately.
Figures such as 16M in the table show the average movie recording bit rate. M stands for Mbps.
GUIDEFRAME
You can display the frame and check that the subject is horizontal or vertical.
The frame is not recorded.
Steps
(MENU)
desired setting
OFF
ON
Tips
Positioning the subject at the cross point of the guide frame makes a balanced composition.
The outer frame of [GUIDEFRAME] shows the display area of a TV which is not compatible with full
pixel display.
STEADYSHOT
You can compensate for camera shake.
Set [
STEADYSHOT] to [OFF] ( ) when using a tripod (sold separately), then the image
becomes natural.
Steps
(MENU)
a desired setting
ACTIVE
STANDARD
OFF (
)
CONVERSION LENS
When using a conversion lens (sold separately), use this function to record using the optimum
compensation for camera shake and focus for the lens.
[GUIDEFRAME] (under
Does not display the guide frame.
Displays the guide frame.
[
STEADYSHOT] (under
Provides a more powerful SteadyShot effect.
Provides the SteadyShot effect under relatively stable recording conditions.
The SteadyShot function is not used.
7
[SHOOTING SET] category)
[SHOOTING SET] category)
a
Advertisement
Table of Contents
