HTC Desire 512 User Manual page 144

144 Wireless sharing
Reconnecting a Bluetooth headset
Normally, you can easily reconnect your headset by switching on Bluetooth on
HTC Desire 512, and then turning on the headset.
However, you might have to connect manually if your headset has been used with
another Bluetooth device.
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off
2. Tap the headset's name in the Paired Devices section.
3. If prompted to enter a passcode, try 0000 or 1234, or consult the headset
documentation to find the passcode.
If you still cannot reconnect to the headset, follow the instructions in
Bluetooth device on page 144, and then follow the steps under
Bluetooth headset on page 143.
Unpairing from a Bluetooth device
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off
2. In the Paired devices section, tap
3. Tap Unpair.
Receiving files using Bluetooth
HTC Desire 512 lets you receive various files with Bluetooth, including photos, music
tracks, contact info, calendar events, and documents such as PDFs.
Refer to the device's documentation for instructions on sending information over
Bluetooth.
1. Turn Bluetooth on.
See Turning Bluetooth on or off
2. On the sending device, send one or more files to HTC Desire 512.
3. If asked, accept the pairing request on HTC Desire 512 and on the sending
device. You may also be prompted to enter the same passcode or confirm the
auto-generated passcode on both devices.
You'll then get a Bluetooth authorization request.
4. Tap Pair.
5. When HTC Desire 512 receives a file transfer request notification, slide the
Notifications panel down, tap the incoming file notification, and then tap
Accept.
on page 143.
on page 143.
next to the device to unpair.
on page 143.
Unpairing from a
Connecting a