Using The Pc Settings - Sony BRAVIA KLV-26S200 Operating Instructions Manual

Using the PC Settings

Option
Wide Mode
Reset
Auto Adjustment
Phase
Pitch
Horizontal Center
Vertical Center
Power Management
Description
Normal Select to display in the original resolution.
Full1
Select to enlarge the picture to fill the display area, keeping its original
aspect ratio.
Full2 Select to enlarge the picture to fill the display area.
Resets the current setting to the default values, except Wide Mode and Power Management.
Select to automatically adjust the display position and phase of the picture when the TV
receives an input signal from the connected PC. Note that Auto Adjustment may not work
well with certain input signals. In such cases, manually adjust the options below.
Auto Adjustment for PC can also be set using the TOOLS button on the remote
control.
Adjust after Pitch to fine tune overall sharpness.
Adjust uneven sharpness on screen.
For the PC Input Signal Reference Chart, see page 41.
Allows you to move the position of the picture left and right.
Press B/b and press to choose a correction between Min, – 49 to + 49 and Max.
Allows you to move the position of the picture up and down.
Press V/v and press to choose a correction between Min, – 49 to + 49 and Max.
On Select to automatically switch to the power saving mode when there is
no signal input for 30 seconds.
Off Select to turn off Power Management.
Power Management is not VESA-compliant.
Using the Menus
35