Change Network Settings - Synology DS411slim Manual

Change Network Settings

Go to Main Menu > Control Panel
Synology DiskStation.
General
In this section, you can change your DiskStation identification on the network by entering a server name. You can
also set up the domain name server and default gateway here.
To rename DiskStation:
Enter the new server name in the
To set up domain name server and default gateway:
Enter the IP address in the
Note: The DNS Server and
interfaces are configured automatically, or if your DiskStation is connected to the Internet via PPPoE.
Network Interface
In this section, you can connect your DiskStation to the network via any of the following network interfaces.
LAN
If your DiskStation is connected to a local area network, you can click
with multiple LAN ports) on the left side to configure the network interface.
To decide how your DiskStation obtains IP address:
1 Choose either of the following:
Get network configuration automatically

Use manual configuration: Manually enter the IP address, subnet mask, DNS, and gateway.

2 Click Apply.
19 Chapter 3: Modify System Settings
> Network to modify the following network settings of your
Server Name field, and click Apply.
DNS server and Default gateway
Default Gateway fields will not be available for modification if all of your network
(DHCP): Get IP address automatically via DHCP.
Synology DiskStation User's Guide
fields, and click Apply.
LAN or LAN [number]
Based on DSM 4.0
(for DiskStations