Synology DS411slim Manual page 137

To set up SMS notification:
1 Choose either of the following options:
Apply the SMS notification settings in Management

to the SMS account specified at the DSM Management UI
Apply the following SMS

SMS notifications to the SMS account specified here:
2 If you choose Apply the following SMS
a Select a SMS provider from the
"Clickatell."
b Click Add to create a new SMS provider configuration or click
configuration. See below for detailed instructions.
c In the fields under Authentication, enter the username and password of your SMS service account.
Note:
 The username is case sensitive and must be between 1 and 32 Unicode characters.
The password is case sensitive and must be between 0 and 24 displayable characters, including letters,

numbers, signs, and space.
d Enter your Primary phone
will be sent to both numbers.
e If you do not wish to receive too many messages, tick
number of notification messages to one message per the time interval you specified.
Note:
The value must be between 1 and 10000.
f Click Send a test SMS message
message is received, it means the configuration is incorrect.
3 Click Save.
To add an SMS provider:
1 Click Add.
2 In the Provider name
Note: The provider name is case sensitive and must be between 1 and 32 Unicode characters.
3 In the SMS URL field, enter a SMS URL with the message content set to "Hello world." You can obtain the
SMS URL from your SMS service provider.
Note: The SMS URL is case sensitive and must be between 1 and 500 Unicode characters.
4 Click Next.
5 On the URL parameter definition
Define each parameter by selecting the corresponding category. Each parameter category can be used only
once except Other.
Note: The number of parameters must be between 4 and 10.
Push Service
You can enable push service to send notification messages to your mobile devices and instant messaging
programs (Windows Live Messenger and Skype) via Synology's push service server when status changes or
errors occur to cameras.
To enable mobile device notifications:
1 Tick Enable mobile device
2 Install and launch DS cam on your mobile device, and then log in to your Surveillance Station to pair your
mobile with Surveillance Station. For more information, refer to its Help file.
137 Chapter 15: Safeguard Your Environment with Surveillance Station
settings: Specify the following information and Surveillance Station will send
settings, you need to complete the following steps:
SMS service provider
number. If you enter a
to send a test SMS message to the phone number you specified. If no
field, enter the name of your SMS service provider.
page, the system will break down the SMS URL into several parameters.
notifications, and then click Save.
Synology DiskStation User's Guide
UI: Surveillance Station will send SMS notifications
(Main Menu > Control Panel
drop down menu. The default service provider is
Delete to delete the selected SMS provider
Secondary phone number, SMS notification messages
Minimum message interval (minutes)
Based on DSM 4.0
> Notification).
and limit the