Philips Q Line 32BDL3650Q User Manual page 59

HDMI One Wire Power Off
Allow user to set multiple devices to standby mode by
pressing the power button. This function is only available
when HDMI CEC is enabled.
Language
Select the language used in the OSD menu.
The options are: English/Deutsch/ 简体中文 /Français/
Italiano/Español/Pyccкий/Polski/Türkçe/ 繁體中文 / 日本語 /
Português/‫/ةيبرعلا‬Danish/Swedish/Finnish/Norwegian/
Dutch/Czech/Lithuanian/Latvian/Estonian.
OSD Transparency
Adjust OSD transparency.
• {Off} - Transparency off.
• {1-100} - Transparency level 1-100
Power Save
Mode 1 [TCP off, WOL on, auto off]
Mode 2 [TCP off, WOL on, auto on/off]
Mode 3 [TCP on, WOL off, auto on/off]
Mode 4 [TCP on, WOL off, no auto on/off]
Power RCU Power
Save Button Off
Mode 1 DC OFF
Mode 2 DC OFF when signal is back,
system wake up
Mode 3 Backlight when signal is back,
OFF system wake up
Mode 4 Backlight Backlight always on,
OFF
Following table is the action for Android board with
different power mode.
Power mode Mode 1, Mode 2
DC off System shutdown
DC on System boot up
Advanced option reset
Reset all settings except {Date and Time} in the advanced
option menu to factory preset values.
No Signal WOL Android
(ARM)
DC OFF V ARM off
V ARM off
X ARM on
X ARM on
show no signal
Mode 3, Mode 4
1. Media Player, Browser, PDF
Player and SmartCMS will close.
2. Android system goes to
default black launcher.
Android system reboot. If Logo
settings is off, system directly
turn backlight on without
rebooting.
57
32BDL3650Q